Basic Model Typecurves
Subtopics:
The typecurves shown below help identify key characteristics for different models based on wellbore configuration, formation configuration, and the presence of a hydraulic fracture. They are representative of drawdown flow periods only, and assume an infinite-acting reservoir (no boundary effects). This is intended as a guide to help in identifying an appropriate model to match the pressure response being analyzed. It is not intended to display an exact typecurve to match a specific pressure response.
Vertical Model
Composite Model
Partial Penetration
Horizontal Model
Multilayer Model
Fracture Model
Wedge Model
Leaky Fault Model
