A
cross section contains potential reservoir rocks but only includes porosity
logs. To estimate hydrocarbon potential for some wells, add resistivity
logs. You may want to add rasters to logs in the following situations:
A
cross section contains potential reservoir rocks but only includes porosity
logs. To estimate hydrocarbon potential for some wells, add resistivity
logs.
A
cross section includes digital GR and DT but no digital resistivity curves
are available for the well. Add raster resistivity logs to conduct preliminary
analysis.
You
typically use manually digitized logs; however, you would like to verify
the data accuracy of some business-critical wells. Load rasters from the
IHS Energy Information Hub and overlay them with digital curves, correct
digits as necessary, then remove the rasters from the well.
To add rasters to logs
1. Right-click the log and from the shortcut menu, select add raster log from Axxses.
The Raster
Catalog dialog box appears.
2. Select the curve(s) to load and then click OK.
