To color depth tracksBy default each well in a cross section has a color background based on Vsh or Phi that is applied to the entire log from the left to right border. If desired, you can select a traditional presentation style with color only applied to the depth track.
To color depth tracks
1. Double-click the log, not a curve or top.
The Single Well Properties: Options
dialog box appears.
2. Select the options tab, select show litho modulation for depth tack only, and then click OK.
Note: For any values you change, you must select
the associated Protected
checkbox to prevent the values in the Global
Petrophysical Settings
dialog box from overwriting your changes.
|
|
