| With this feature... |
Do this... |
| Width |
Type the width to display the wells selected in the
display pane on the depth page. |
| Position |
Type the distance to display the well selected in the
display pane from the left canvas edge on the depth page. |
| Template |
Click Edit to
display the Edit
Multi-log per track dialog box and configure track properties including
which logs appear in various tracks. |
| Space evenly Sort east to west |
Click Update
to change wells from proportional spacing to evenly dispersed along the
cross section. If spacing evenly, GeoSyn moves interwell
nodes too. You can only sort east to west when there aren't already correlations
drawn in the depth model. |
| Scale annotations |
Click Font to
change text display properties and select an increment for the vertical
scale from the drop-down list. |
| Markers |
Select the increment for major and minor markers from
the drop-down list. |
| Header annotations |
Click to display the Edit
Well Header Display dialog box and select the fields to display
in the well headers on either the time or depth pages. |
| Trim wells |
Select whether to trim wells by Kelly Bushing or Subsea
depths then type the start and stop depth for the well. If simultaneously
trimming multiple wells, select subsea. Only the shallowest start depth
and deepest stop depth in the range selected appear, though all wells
are trimmed. |
| Display pane |
Select the well(s) to modify. SHIFT+CLICK
or CTRL+CLICK for multiple selection. |
| Export |
Click to display the Export
Wells dialog box and save wells to disk in either GeoSyn or LAS
format. |
| Logs |
Click to display Log Editor. |
| Tops |
Click to display the Top
Properties dialog box. |
| Properties |
Click to display the Well
Properties dialog box. |
| Duplicate |
Click to duplicate the well selected in the display
pane then click the depth model in the location in which to insert it.
If there are correlations already drawn in the depth model, the Insert a well into existing
model dialog box automatically appears and you correlate the tops
in the duplicated well with those in the cross section. |
| Delete |
Click to delete the well(s) selected in the display
pane. CTRL+CLICK or SHIFT+CLICK
for multiple selection. |