Using the Hybrid Model

After all the parameters are populated, the model can be calculated.

To use the hybrid model:

1. In the Hybrid Model pane, select your calculation method . You can use the rates of any of the fluids displayed in the model to calculate rates for the remaining fluids, and the sandface flowing pressure. Or, you can use the sandface flowing pressure to calculate rates for all the fluids displayed in the model.

2. To have the model calculate automatically, and recalculate automatically every time you change model parameters, click the AutoCalc icon ().

If the AutoCalc icon is deselected, you must click the Synthesize icon () every time you want to recalculate the model.

3. While the calculation is running, you can check the Status Window to see calculation progress.

4. To stop the simulation, click the Stop Simulation () icon.