Importing Data from a PAS File

Subtopics:

PRD PAS

PAS AER

There are two types of PAS files that you can import: PRD (production data) and TRG (gauge data).

Data may be imported using the wizard, or by opening the Import data dialog box, which may be accessed by clicking File, Import Data. The wizard takes you step-by-step through the import process and this topic describes each step.

PRD PAS

To import a PRD PAS file:

1. Click the Wizard Menu and select Import.

The Import data dialog box opens.

2. Browse to your PRD PAS file, and then click Open.

The Import PAS-PRD File dialog box opens.

3. Click the Skip Blank Data Line checkbox (if it is not checked).

4. Select the data you'd like to bring in to WellTest, and click OK.

Your data opens in a new tab in the Data Management, Data sub-tab area.

PAS AER

To import a PAS AER file:

1. Click the Wizard Menu and select Import.

The Import data dialog box opens.

2. Browse to your PAS AER file and then click Open.

Your gauge data opens in a new tab in the Data Management, Data sub-tab area.