To estimate water saturation
for single wellsYou can adjust water saturation using unique settings for a selected well (Rw, Rshale, estimation method, a-factor, m-factor, and n-factor).
To estimate water saturation
for single wells
1. Double-click the log, not a curve or top.
The Single Well Properties: Saturation
dialog box appears.
2. Select the saturation tab, change the dialog box parameters based on your preferences, and then click OK.
Note:
For any values you change, you must
select the associated Protected
checkbox to prevent the values in the Global
Petrophysical Settings
dialog box from overwriting your changes.
|
|
