After selecting new XSec (
) in the left
toolbar, click wells on the map to include in a cross section. The wells
appear in the cross section in the order in which you click them regardless
of geographic order with all settings from the last active cross section
applied.
You can display previously created cross sections by
selecting Toggle Cross Section Lines (
) in the left toolbar
and simply double-click one to launch that cross section.
To create cross sections
1. Select
new XSec () in the left toolbar.
|
2. Review the mini well card that appears when you hover the cursor over each well and click to select wells that meet your criteria. |
|
For more well details and if working in AccuMap DB mode, you can right-click the well and display its AccuXCard. See Related Topics for details.
3. Double-click the last well to begin downloading well logs from the IHS Energy Information Hub.
As AccuX loads digital online curves for each well, a blue square covers the well symbol.
If you selected show
curve selection before transaction in the Global
Online Axxses Settings dialog box, the Axxses
Curve Selection
dialog box appears. Select the specific curves, and start and stop depths
to download for each well and then click OK.
You can control which curves appear in this dialog box by selecting specific
curve types in the Global
Online Axxses Settings dialog box and also by adding or
removing curve aliases that appear in the Digital
Log: Alias dialog box.
