To set global curve propertiesYou can define how a curve appears throughout an entire cross section including the curve color, mnemonic, scale, and more. For example, if you specify that all gamma ray curves be orange and two points thick, this setting applies to all current and future imported gamma ray curves.
To set global curve properties
1. From the Global Menu, select Global digital curve manager.
The Global Digital Curve Manager
dialog box appears.
2. Select the desired display options and then click Apply.
Note: Changes to the logarithmic track scale are
not applied when there is more than one curve in a track. You must set
the logarithmic track that applies to all curves.
|
|
