| With this feature... | Do this... |
|---|---|
| Display pane | Select a model(s) to modify (SHIFT+CLICK or CTRL+CLICK for multiple selection), then click either New or Duplicate. |
| Name | Type a more descriptive name for the model. |
| Type | Select from the following: Zero offset Multi offset Derived based on a mathematical operation performed on two other models in the current synthetic. |
| Attribute | Select the mathematical transformation used to explain the data. |
| Amplitude | Type the display amplitude of the trace data. |
| Reflection coefficients | Select the source curve and method to use when creating the AVO logs. Click Create AVO Log suite to create numerous types of logs to use in AVO analysis. |
| Multiples | Select whether to display simulated first order multiples alongside primary reflections, or to just display multiples and not the primary reflection. First order multiples are the first reflection of a primary reflection. |
| Cutoff % Max RC | Type the maximum percent for the reflection coefficient below which multiples are not shown. GeoSyn calculates the maximum reflection coefficient in the model, uses a percentage of that, and ignores all reflection coefficients less than that. |
| AGC | Type a value in milliseconds for the automatic gain control. |
| Noise | Select the Apply check box and then click Edit to display the Noise Parameters dialog box, where you apply noise type. |
| Expanded tab | Drag the sliders to select the width of the desired display size, the reflection coefficient cutoff, and the wavelet fill pane. |
Parent Topics
| Changing Wavelet Expansion Properties | Creating Models |
| Creating AVO Logs |