To change engineering values(Example: Converting Fraction to Percent)
To change engineering values you can multiply or shift engineering values for a digital curve.
Some digital curves may appear as straight lines when the scale disagrees with the engineering values. For example, AccuX left and right scales are in percent units where the left scale is 45% and the right scale is -15%, while some actual digital line points are recorded as fractions. Using the Single Curve Managing dialog box, you can convert these fractions to percents so they display correctly.
To change engineering values
(Example: Converting Fraction to Percent)
|
1. Hover your cursor over the curve until the tooltip appears. |
|
2. Double-click the curve.
The Single Curve Managing
dialog box appears.
3. In the Multiply by box, type 100, and then click OK.
|
|
