To create residual mapsYou can display a residual map layer to identify local structure variations after removing common (harmonic) trends.
To create residual maps
1. In the
left toolbar, click AccuX Vision
(
).
The Setup AccuX Vision
dialog box appears.
2. In the Data Group list, select Tops then in the Data Field lists, select RESIDUAL.
3. Click the lookup button(s) below the Data Group list to display the Formation Lookup dialog box and select the desired formation tops.
4. Select the desired top, click OK to return to the Setup AccuX Vision dialog box, and then click OK to generate the map.
The residual map appears as a base layer.
5. In the
left toolbar, click Residual Structural
Map (
).
The Residual Structural Map
dialog box appears.
6. Drag the
smooth grid slider to increase
or reduce the smoothing for both the residual map and formation top overlay
(if displayed).
The changes applied above also appear in the Smooth
By box of the Map
> Properties > Gridding tab.
7. Drag the trend components removing slider right to reduce harmonic trends.
8. To display the contours of the formation top upon which the residual map is based, select show subsea contours then type contour parameters and label display frequency.
9. Double-click the color box, select a contour color from the popup color palette, and then click Apply.
